Vacuum Variable
Please choose from the following VACUUM VARIABLE Sub-Catagory choices:
AMB-1 Aluminum Mounting Block for Vacuum Capacitors (Pull)
In Stock
- Length: 4.25 in / 107.95 mm
- Width: 3.00 in / 76.200 mm
- Height: 0.75 in / 19.050 mm
- Inner Diameter: 2.043 in / 51.8922 mm
- (compatible with capacitors that use FM2 flanges)
Clean Used * No longer available for export
SKU: AMB-1
FM0A Mounting Flange for Vacuum Relays/Capacitors (Pull)
In Stock
- Material: 0.032 Copper
- Inner Diameter: 0.81 in / 20.574
- Outer Diameter: 2.00 in / 50.800 mm
- Height: 1 in / 25.4 mm
Used
SKU: FM0A-P
FM3C Mounting Flange for Vacuum Capacitors (Pull)
In Stock
FM3C Mounting Flange for Vacuum Capacitors
| Important Data | |
| Material: | 0.062 Copper with Silver plating |
| Inner Diameter: | 3.14 in / 79.756 mm |
| Outer Diameter: | 4.25 in / 107.95 mm |
| Height: | 0.62 in / 15.748 mm |
Used * No longer available for export
SKU: FM3C-P
Mounting Bracket for Jennings Vacuum Variable Capacitor (Pull)
In Stock
- RIng Inside Diameter: 2 inches
- Fits CVCC-2000 and similar capacitors
Used
SKU: MB-CVCC-P
FM2S Mounting Flange for Vacuum Relays/Capacitors (Pull)
In Stock
FM2S-P Mounting Flange for Vacuum Relays/Capacitors, OD: 3.25", ID: 2.03", HT: 0.50"
Clean Used * No longer available for export
SKU: FM2S-P
Add to Cart
22729 Bracket for Vacuum Variable Capacitor (Pull)
In Stock
- Metal Bracket
- Six mounting holes : 1-3/16" center to center
- Outside diameter: 2-13/16"
- Bolt hole: 3/16" diameter
- Height: ~1-15/16"
Used * Pulled from working equipment
SKU: 22729-BRACKET
SC119 HH Smith Panel Mount 1/4" Shaft Collar 3/8" Panel Hole
In Stock
The 119 is a 1/4" hexagonal brass Panel Bearing with nickel plated finish. 0.253" Inner Diameter
Comes with mounting nut.
New Old Stock * No longer available for export
MFR Part # 119
MFR: HH Smith
Size: 0.493" x 0.37"
SKU: SC119
Add to Cart
164 HH Smith Semi-Flexible 1/4" Shaft Coupler
In Stock
Nylon Coated
MFR: HH Smith
SKU: SC10
Add to Cart
VD1 Jackson Vernier 6:1 Reduction Drive with 1/4" Shaft with 3/16" Shaft End
In Stock
- Shaft: 1/4" with 3/16" shaft end
- Size: 1.1" diameter x 1.485" (Mounting ears) x 1.72" (Overall Length)
- NOTE: Possibly used in Swan or Atlas Radio Equipment.
MFR: Jackson Brothers
Made in Engalnd
SKU: VD1
Add to Cart
1560 Litton Useco Panel Mount 1/4" Shaft Collar
In Stock
- Comes with mounting nut.
MFR: Litton Useco
SKU: SC8
Add to Cart
